Copyright © www.batteriestransport.org 90 2.2.2_II LITHIUM ION CELLS CONTAINED IN EQUIPMENT (including lithium ion polymer cells) Small cells excepted UN 3481 Application Lithium ion cells contained in equipment with a Watt-hour rating not exceeding 20 Wh/cell UN No., Proper Shipping Name UN 3481, LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT Class 9 Small excepted Packing Group Not assigned Hazard Label Not required Prerequisite • Cells must meet the General Requirements of § 1.3 in particular the t st requirements Transport mode ADR IMDG IATA Passenger Aircraft Cargo Exemption conditions SP 188 SP 188 PI 967 section II • Cells when installed in equipment must be protected from damage and short circuit, must be secured against movement within the outer packaging. • The equipment must be equipped with an effective means of preventing accidental activation. • Devices such as radio frequency identification (RFID) tags, watches and temperature loggers, which are not capable of generating a dangerous evolution of heat, may be transported when intentionally active. When active, these devices must meet defined standards for electromagnetic radiation to ensure that the operation of the device does not interfere with aircraft systems. The devices must not be capable of emitting disturbing signals (such as buzzing alarms, strobe lights, etc.) during transport Packaging Drums, Jerricans, Boxes; not required approved packaging. The equipment must be packed in strong outer packagings constructed of suitable material of adequate strength and design in relation to the packaging's capacity and its intended use unless the cell is afforded equivalent protection by the equipment in which it is contained. Where multiple pieces of equipment are packed in the same outer packaging, the equipment must be packed and protected against contact with other equipment so as to prevent damage; Weight limit cells/package No limit No limit 5 kg Net 5 kg Net Marking and Labelling of Packages Minimum dimensions: 100 × 100 mm Where the packages are of dimensions such that they can only bear smaller labels the label dimensions may be reduced to 100 mm × 70 mm Marking is not required for packages containing: • button cell installed in equipment (including circuit boards), • ≤ 4 cells installed in equipment, where there are not more than two packages in the consignment. Overpack OVERPACK + same labels as above OVERPACK + same labels as above OVERPACK + same labels as above OVERPACK + same labels as above Provision: see § 1.9.4 Documents Transport document is not required MDGF is not required Shipper’s declaration is not required; The words “Lithium ion batteries in compliance with Section II of PI 967” must be included in “Nature and Quantity of Goods” box of the air waybill. Instructions to personnel Any person preparing or offering cells for transport must receive adequate instruction on these requirements commensurate with their responsibilities.
RkJQdWJsaXNoZXIy MjQwNg==